# # # This file has all the information about oper classes, types and o:lines. # You *MUST* edit it. #-#-#-#-#-#-#-#-#-#-#-#- SERVER DESCRIPTION -#-#-#-#-#-#-#-#-#-#-#-#- #-#-#-#-#-#-#-#-#-#-#-#- ADMIN INFORMATION -#-#-#-#-#-#-#-#-#-#-#-# # When linking servers, the openssl and gnutls implementations are completely # link-compatible and can be used alongside each other # on each end of the link without any significant issues. # Supported ssl types are: "openssl" and "gnutls". # You must load, m_ssl_openssl for openssl # or m_ssl_gnutls for gnutls. # If you want to link servers to InspIRCd you must load the # # m_spanningtree.so module! Please see the modules list for # # information on how to load this module! If you do not load this # # module, server ports will NOT work! # # # #-#-#-#-#-#-#-#-#-#- DIE/RESTART CONFIGURATION -#-#-#-#-#-#-#-#-#-#- # # # You can configure the passwords here which you wish to use for # # the die and restart commands. Only trusted IRCop's who will # # need this ability should know the die and restart password. # # # # # x96.in note: you can get this hash without running your ircd by typing # echo -n "yourpassword" | sha256sum # in a console hash="sha256" # diepass: Password for opers to use if they need to shutdown (die) # a server. diepass="hash of die pass" # restartpass: Password for opers to use if they need to restart # a server. restartpass="hash of restart pass"> #-#-#-#-#-#-#-#-#-#- CONNECTIONS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # This is where you can configure which connections are allowed # # and denied access onto your server. The password is optional. # # You may have as many of these as you require. To allow/deny all # # connections, use a '*' or 0.0.0.0/0. # # # # -- It is important to note that connect tags are read from the -- # # TOP DOWN. This means that you should have more specific deny # # and allow tags at the top, progressively more general, followed # # by a # # connect:reason is the message that users will see if they match a deny block #-#-#-#-#-#-#-#-#-#-#-#- AUTOJOIN CHANNELS -#-#-#-#-#-#-#-#-#-#-#-#- # # uncomment and adjust this if you want users to automatically join # one or more channels when connecting to your IRC server # # #-#-#-#-#-#-#-#-#-#-#-#- CONNJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # If you have m_conn_join.so loaded, you can configure it using the # follow values: # # #-#-#-#-#-#-#-#-#-#-#-#- CIDR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#- # # # CIDR configuration allows detection of clones and applying of # # throttle limits across a CIDR range. (A CIDR range is a group of # # IPs, for example, the CIDR range 192.168.1.0-192.168.1.255 may be # # represented as 192.168.1.0/24). This means that abuse across an ISP # # is detected and curtailed much easier. Here is a good chart that # # shows how many IPs the different CIDRs correspond to: # # http://en.wikipedia.org/wiki/CIDR#Prefix_aggregation # # # # This file has all the information about server links and ulined servers. # You *MUST* edit it if you intend to link servers. #-#-#-#-#-#-#-#-#-#- MISCELLANEOUS CONFIGURATION -#-#-#-#-#-#-#-#-#-# # # # Files block - contains files whose contents are used by the ircd # # motd - displayed on connect and when a user executes /MOTD # rules - displayed when the user executes /RULES # Modules can also define their own files # Example of an executable file include. Note this will be read on rehash, # not when the command is run. # #-#-#-#-#-#-#-#-#-#-#-# MAXIMUM CHANNELS -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # If these values are not defined, InspIRCd uses the default DNS resolver # of your system. # An example of using an IPv6 nameserver # #-#-#-#-#-#-#-#-#-#-#-#-#-#-# PID FILE -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # Define the path to the PID file here. The PID file can be used to # # rehash the ircd from the shell or to terminate the ircd from the # # shell using shell scripts, perl scripts, etc... and to monitor the # # ircd's state via cron jobs. If this is a relative path, it will be # # relative to the configuration directory, and if it is not defined, # # the default of 'inspircd.pid' is used. # # # # #-#-#-#-#-#-#-#-#-#-#-#-#- BANLIST LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # Use these tags to customise the ban limits on a per channel basis. # # The tags are read from top to bottom, and any tag found which # # matches the channels name applies the banlimit to that channel. # # It is advisable to put an entry with the channel as '*' at the # # bottom of the list. If none are specified or no maxbans tag is # # matched, the banlist size defaults to 64 entries. # # # #-#-#-#-#-#-#-#-#-#-#- DISABLED FEATURES -#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # This tag is optional, and specifies one or more features which are # # not available to non-operators. # # # # For example you may wish to disable NICK and prevent non-opers from # # changing their nicknames. # # Note that any disabled commands take effect only after the user has # # 'registered' (e.g. after the initial USER/NICK/PASS on connection) # # so for example disabling NICK will not cripple your network. # # # # You can also define if you want to disable any channelmodes # # or usermodes from your users. # # # # `fakenonexistant' will make the ircd pretend that nonexistant # # commands simply don't exist to non-opers ("no such command"). # # # # #-#-#-#-#-#-#-#-#-#-#-#-#- SERVER OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-# # # # Settings to define which features are usable on your server. # # # # suffixpart: What (if anything) a users' part message # should be suffixed with. suffixpart=""" # fixedquit: Set all users' quit messages to this value. #fixedquit="" # fixedpart: Set all users' part messages in all channels # to this value. #fixedpart="" # syntaxhints: If enabled, if a user fails to send the correct parameters # for a command, the ircd will give back some help text of what # the correct parameters are. syntaxhints="no" # cyclehosts: If enabled, when a user gets a host set, it will cycle # them in all their channels. If not, it will simply change their host # without cycling them. cyclehosts="yes" # cyclehostsfromuser: If enabled, the source of the mode change for # cyclehosts will be the user who cycled. This can look nicer, but # triggers anti-takeover mechanisms of some obsolete bots. cyclehostsfromuser="no" # ircumsgprefix: Use undernet-style message prefixing for NOTICE and # PRIVMSG. If enabled, it will add users' prefix to the line, if not, # it will just message the user normally. ircumsgprefix="no" # announcets: If set to yes, when the TimeStamp on a channel changes, all users # in channel will be sent a NOTICE about it. announcets="yes" # allowmismatch: Setting this option to yes will allow servers to link even # if they don't have the same VF_OPTCOMMON modules loaded. Setting this to # yes may introduce some desyncs and weirdness. allowmismatch="no" # defaultbind: Sets the default for tags without an address. Choices are # ipv4 or ipv6; if not specified, IPv6 will be used if your system has support, # falling back to IPv4 otherwise. defaultbind="auto" # hostintopic: If enabled, channels will show the host of the topicsetter # in the topic. If set to no, it will only show the nick of the topicsetter. hostintopic="yes" # pingwarning: If a server does not respond to a ping within x seconds, # it will send a notice to opers with snomask +l informing that the server # is about to ping timeout. pingwarning="15" # serverpingfreq: How often pings are sent between servers (in seconds). serverpingfreq="60" # defaultmodes: What modes are set on a empty channel when a user # joins it and it is unregistered. This is similar to Asuka's # autochanmodes. defaultmodes="nt" # moronbanner: This is the text that is sent to a user when they are # banned from the server. moronbanner="You're banned! Email haha@abuse.com with the ERROR line below for help." # exemptchanops: exemptions for channel access restrictions based on prefix. exemptchanops="nonick:v flood:o" # invitebypassmodes: This allows /invite to bypass other channel modes. # (Such as +k, +j, +l, etc) invitebypassmodes="yes" # nosnoticestack: This prevents snotices from 'stacking' and giving you # the message saying '(last message repeated X times)'. Defaults to no. nosnoticestack="no" # welcomenotice: When turned on, this sends a NOTICE to connecting users # with the text Welcome to ! after successful registration. # Defaults to yes. welcomenotice="yes"> #-#-#-#-#-#-#-#-#-#-#-# PERFORMANCE CONFIGURATION #-#-#-#-#-#-#-#-#-#-# # # #-#-#-#-#-#-#-#-#-#-#-# SECURITY CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-# # # is used. hidewhois="" # hidebans: If this value is set to yes, when a user is banned ([gkz]lined) # only opers will see the ban message when the user is removed # from the server. hidebans="no" # hidekills: If defined, replaces who set a /kill with a custom string. hidekills="" # hidesplits: If enabled, non-opers will not be able to see which # servers split in a netsplit, they will only be able to see that one # occurred (If their client has netsplit detection). hidesplits="no" # maxtargets: Maximum number of targets per command. # (Commands like /notice, /privmsg, /kick, etc) maxtargets="20" # customversion: Displays a custom string when a user /version's # the ircd. This may be set for security reasons or vanity reasons. customversion="" # operspywhois: show opers (users/auspex) the +s channels a user is in. Values: # splitmsg Split with an explanatory message # yes Split with no explanatory message # no Do not show operspywhois="no" # runasuser: If this is set, InspIRCd will attempt to switch # to run as this user, which allows binding of ports under 1024. # You should NOT set this unless you are starting as root. # NOT SUPPORTED/NEEDED UNDER WINDOWS. #runasuser="" # runasgroup: If this is set, InspIRCd will attempt to switch # to run as this group, which allows binding of ports under 1024. # You should NOT set this unless you are starting as root. # NOT SUPPORTED/NEEDED UNDER WINDOWS. #runasgroup="" # restrictbannedusers: If this is set to yes, InspIRCd will not allow users # banned on a channel to change nickname or message channels they are # banned on. restrictbannedusers="yes" # genericoper: Setting this value to yes makes all opers on this server # appear as 'is an IRC operator' in their WHOIS, regardless of their # oper type, however oper types are still used internally. This only # affects the display in WHOIS. genericoper="no" # userstats: /stats commands that users can run (opers can run all). userstats="Pu"> #-#-#-#-#-#-#-#-#-#-#-#-# LIMITS CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-# # # # This configuration tag defines the maximum sizes of various types # # on IRC, such as the maximum length of a channel name, and the # # maximum length of a channel. Note that with the exception of the # # identmax value all values given here are the exact values you would # # expect to see on IRC. This contrasts with the older InspIRCd # # releases where these values would be one character shorter than # # defined to account for a null terminator on the end of the text. # # # # These values should match network-wide otherwise issues will occur. # # # # The highest safe value you can set any of these options to is 500, # # but it is recommended that you keep them somewhat # # near their defaults (or lower). # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Logging # ------- # # Logging is covered with the tag, which you may use to change # the behaviour of the logging of the IRCd. # # In InspIRCd as of 1.2, logging is pluggable and very extensible. # Different files can log the same thing, different 'types' of log can # go to different places, and modules can even extend the log tag # to do what they want. # # An example log tag would be: # # which would log all information on /oper (failed and successful) to # a file called opers.log. # # There are many different types which may be used, and modules may # generate their own. A list of useful types: # - USERS - information relating to user connection and disconnection # - OPER - succesful and failed oper attempts # - KILL - kill related messages # - snomask - server notices (*all* snomasks will be logged) # - FILTER - messages related to filter matches (m_filter) # - CONFIG - configuration related messages # - COMMAND - die and restart messages, and messages related to unknown user types # - SOCKET - socket engine informational/error messages # - MODULE - module related messages # - STARTUP - messages related to starting up the server # # You may also log *everything* by using a type of *, and subtract things out # of that by using -TYPE - for example "* -USERINPUT -USEROUTPUT". # # Useful levels are: # - default (general messages, including errors) # - sparse (misc error messages) # - debug (debug messages) # # Some types only produce output in the debug level, those are: # - BANCACHE - ban cache debug messages # - CHANNELS - information relating to joining/creating channels # - CULLLIST - debug messages related to issues with removing users # - RESOLVER - DNS related debug messages # - CONNECTCLASS - Connection class debug messages # - USERINPUT # - USEROUTPUT # # The following log tag is highly default and uncustomised. It is recommended you # sort out your own log tags. This is just here so you get some output. #-#-#-#-#-#-#-#-#-#-#-#-#- WHOWAS OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-# # # # This tag lets you define the behaviour of the /whowas command of # # your server. # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#- BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # The ban tags define nick masks, host masks and ip ranges which are # # banned from your server. All details in these tags are local to # # Your server. # # # # exception: Hosts that are exempt from [kgz]lines. #-#-#-#-#-#-#-#-#-#-#- INSANE BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # This optional tag allows you to specify how wide a gline, eline, # # kline, zline or qline can be before it is forbidden from being # # set. By setting hostmasks="yes", you can allow all G, K, E lines, # # no matter how many users the ban would cover. This is not # # recommended! By setting ipmasks="yes", you can allow all Z lines, # # no matter how many users these cover too. Needless to say we # # don't recommend you do this, or, set nickmasks="yes", which will # # allow any qline. # # #